Silicone weathering glue refers to low modulus neutral silicone sealing material used for curtain wall caulking. Before use, carefully read the correct construction method and use of silicone weathering glue, and pay attention to the instructions for safe use and related health hazards.

Main uses: System doors and windows, mobile houses, containers, custom homes, decorative stones, wall panels.
About the use of silicone weathering glue:
1. Silicone weathering glue can be easily sprayed out of the glue bottle with a glue gun. If there is no silicone gun, you can consider cutting the bottle with a blade and then smearing it with a spatula or wood chip. You can use adhesive tape to cover the periphery to avoid smearing other places and make it beautiful after curing, but after applying the glue, it must be removed before the outer skin is formed.

2. The curing process of silicone weathering glue develops from the surface to the inside. The surface drying time and curing time of silicones with different characteristics are not the same, so if you want to repair the surface, you must do it before the silicone weathering glue dries.

3. The curing time of silicone weathering adhesive increases with the increase of bonding thickness. For example, a 12mm thick acidic silicone weathering adhesive may take 3-4 days to solidify, but within about 24 hours, the outer layer of 3mm has been cured.

4. Clean the toilet and the floor surface completely, remove the oil stains, and then evenly apply the silicone weathering adhesive on the prepared floor surface, and then squeeze the other side with enough force to squeeze out the air, and wait for the silicone weathering adhesive to solidify, but be careful not to squeeze out the silicone weathering adhesive.

5. Before the silicone weathering adhesive is cured, it can be wiped off with a cloth strip or paper towel. After curing, it must be scraped off with a scraper or scrubbed with solvents such as xylene and acetone.

6. During the curing process, silicone weathering adhesive will release irritating gases, which are irritating to human eyes and respiratory tract. Therefore, this product should be used in a well-ventilated environment to avoid entering the eyes or long-term contact with the skin (wash hands after use, before eating or smoking). Keep out of reach of children; the construction site should be well ventilated; if accidentally splashed into the eyes, rinse with clean water and seek medical attention immediately. Fully cured silicone weather-resistant adhesive is not dangerous.

7. Before use, carefully read the correct construction method and use of silicone weather-resistant adhesive, and pay attention to the instructions on safe use and related health hazards.